Maximize screen for proper column
width/rows
Exclusively cast by: Model Car World Resin Replicas
Model Car World Resin Replicas aims to provide you
with quality resin castings, with only minor cleanup and fitting required.
Kits include instructions for chassis conversions and/or parts swapping.
Chrome parts must be painted with Alclad II Chrome, covered with Bare-Metal
Foil or sent by the builder to be plated. Small pinholes or air bubbles are
easily filled with putty. We recommend MCW's 0900 Polyester Putty. Use a
good super glue or 5 minute epoxy for assembly. For body or parts warpage,
heat the area with a hair dryer until pliable. Straighten the part while
soft and hold it under cold water to set in place. The
resin can be painted with any paint. MCW sells excellent
primer plus thousands of factory original colors for stock and race cars.
There will be new releases periodically, so check for updates. Allow 2-4
weeks for delivery. You will be promptly notified of any longer delays. We
offer limited production computer printed decals with most kits.
ORDER ITEMS FROM PAINT LIST SEPARATELY!
No phone or COD orders.
PLEASE NOTE:
MCW was not able to get the decal people to do racing decals
for our kits, so we do our own. The decals we are doing
ourselves are computer printed and are very low production. They are
available only with kits, unless listed below as decals only.
They are NOT SLIXX DECAL QUALITY. Hand done on our computer and
alps printer, quality is good and appropriate for vintage race cars.
We do the best we can to provide racing history no one else can or will.
See RESIN GALLERY for pictures of
most of our kits built for display.
NEW PRICES in entire Resin Catalog.
This is our first ever price increase in 12 years!
CHEVROLET (See PAR-06 in parts)
BIS-62 1962 Chev. Biscayne 2dr. Sedan
(1/25th scale)
$34.00
S/S Drag Car - with decals
$42.00
New decal -
Mousie Brown A/S - 1 car
CHE-64ht 1964 Chevelle Malibu Ht. -
not SS (1/25th scale)
$38.00
(regular Malibu body w/center side chrome, open
hood, bench seat interior,
bumpers, & wheel covers) (Use Revell '65 Chevelle
SS Ht. kit for donor)
With Drag decals -
$46.00
Specify Dick Harrell, Malcom
Durham, Huston Platt, or Tom Sturm
CHE-64sd 1964 Chevelle 300 2dr.
Sedan (1/25th scale)
$38.00
(stock body, open hood, bench seat interior, bumpers,
wheels & hubcaps)
(Use Revell '65 Chevelle SS Ht. kit for donor.
See PAR-06)
With Drag decals -
$46.00
Specify Jack May, or Wally
Bell
CHE-65sd 1965 Chevelle 300 2dr.
Sedan (1/25th scale)
$34.00
(stock body, bench seat interior, bumpers, wheels
& hubcaps)
(Use Revell '65 Chevelle SS Ht. kit for donor.
See PAR-06)
BIS-66 1966 Chev. Biscayne 2dr. Sedan
(1/25th scale)
$40.00
(body, hood, interior, seats, grill & bumpers, wheels
& hubcaps, & vac. glass)
(use Monogram '65 Impala Ht. kit for donor - AMT '67
will work with mods.)
With Drag decals -
$48.00
Specify Casler Tires, Kicks,
or Secret Storm A/S 427's
IMP-66 1966 Chev. Impala SS Ht.
(1/25th scale)
$40.00
(stock body, hood, interior & seats, grill &
bumpers)
(use Monogram '65 Impala Ht. kit for donor - AMT '67
will work with mods.)
CHE-67 1967 Chevelle 300 2dr. Sedan
(1/25th scale) $37.00
(stock body, hood, seats, grill, rear bumper, wheels
& hubcaps, & vac. glass)
(use Revell '67 Chevelle SS kit for donor - AMT
'67 will work with mods.)
BIS-68 1968 Chev. Biscayne 2dr. Sedan
(1/25th scale)
$40.00
(stock body, hood, interior & seats, grill
& bumpers, wheels & vac. rear glass)
(use AMT '67 Impala Ht. kit for all other
parts needed.)
IMP-68 1968 Chev. Impala SS Ht.
(1/25th scale)
$40.00
(stock body, hood, interior & seats, grill
& bumpers, & wheel covers)
(use AMT '67 Impala Ht. kit for all other
parts needed.)
FORD
New lower price - no longer a complete
kit
MUS-66fc 1966 Ford Mustang SOHC 427 Longnose
Funny/Car (1/25th)
$34.00
(body with extended front end, hood, chassis, and vacuformed
glass)
(Use AMT/Model King AWB Mustang kit for donor.)
With Drag decals $42.00
(specify - Dick Brannan,
Gas Ronda - 1 car ea.; Tasca Ford - does 2
versions; or
Tom Grove/Hubert Platt - does both cars)
PLYMOUTH
BAR-66lnfc 1966 Longnose Cuda AWB Funny Car
(1/25th scale)
$40.00
(extended AWB body, hood, chassis, interior tub,
cage, & fuel injection)
(To convert to front engine car - use AMT/Model
King Hemi Under Glass kit.)
With Drag decals $48.00
(specify - Kingfish or Sox &
Martin)
PONTIAC (See WH-03 in Parts)
PON-60ht 1960 Pontiac Catalina/Ventura
Ht. (1/25th scale)
$50.00
Complete car - specify stock interior
(except wheels & tires - hood molded
closed)
Drag Car - with Arnie Beswick decals
$58.00
New lower price - no longer a complete
kit
TEM-63fc 1963 Pontiac Tempest Longnose Funny Car
(1/25th scale)
$48.00
(body, separate extended frontend, blown Pontiac engine,
chassis, wheels, &
Arnie Beswick Tameless Tiger
decals - not available separately)
(Use AMT/Model King Funny Farmer kit as donor - incorrect
body & engine)
PARTS ONLY:
PAR-14 Semi Tractor/Trailer Dual
Fenders (1/25th scale)
$12.00
TIR-10 Wide White Wall Tires
(1/25th scale) $9.00
(1950 to 1961 - set of four Monogram style with
white inserts)
DECALS ONLY
#456 Filthy Forty
- '40Willys Gasser (also does '33 Willys)
$10.00
PLEASE NOTE:
MCW was not able to get the decal people to do racing decals
for our kits, so we do our own. The decals we are doing
ourselves are computer printed and are very low production. They are
available only with kits, unless listed above as decals only.
They are NOT SLIXX DECAL QUALITY. Hand done on our computer and
alps printer, quality is good and appropriate for vintage race cars.
We do the best we can to provide racing history no one else can or will.
See RESIN GALLERY for pictures of
most of our kits built for display.
|
